Buku Panduan Akademik 2022 Departemen Teknik Mesin dan Industri FT UGM sudah dapat diunduh pada tautan
http://ugm.id/BPADTMI22 (untuk program sarjana) dan
http://ugm.id/BPA2022PascasarjanaDTMI (untuk program pascasarjana) atau klik link di bio.
Selamat dan sukses untuk perkuliahan di semester barunya #sobatDTMI dan bersama DTMI UGM sukses meraih masa depan 🤩👍
Department of Mechanical and Industrial Engineering, Faculty of Engineering Universitas Gadjah Mada held a handover ceremony as well as the inauguration ceremony for the Authorized Training Center (ATC) for Automation granted by PT. Mitsubishi Electrics Indonesia on Wednesday (26/10). The inauguration of the ATC was performed by handing over the Demokit Panel devices to Dean of Faculty of Engineering, Prof. Selo, by Takahiko Kukutsu (Head of Division Factory Automation) at DTMI’s CEMTI Laboratory. The ceremony was also attended by representatives of PT. MEIN Ivan Chandra – Deputy General Manager Industrial Automation Department, Belinda Nathasya – Marketing Supervisor Industrial Automation Department, Yunike Julian – Marketing Staff Industrial Automation Department, and Ivan Ferdyan – Senior Sales Engineer Factory Automation.
The three Demokit Panel devices granted were meant to support learning and research activities in the surroundings of FT UGM, especially at the Department of Mechanical and Industrial Engineering, Faculty of Engineering Universitas Gadjah Mada. “We hope that by granting these Demokit Panel devices, we can support the development of industrial products and the learning activities about smart factory. We also hope that the industrial sector would support all learning activities in the universities, so that engineering graduates could become the ones to bring about fresh concepts and their implementations in the industrial world,” said Ivan Chandra.
After the explanation of Mitsubishi’s automation technology by the representative of PT. Mitsubishi Electrics Indonesia at Ruang Sidang 1, the event was then continued with the inauguration ceremony of the ATC at DTMI UGM’s CEMTI Laboratory.
PR of DTMI | October 2022
SEMAR UGM successfully won two titles at once in Shell Eco-Marathon 2022 held at Mandalika International Street Circuit, Lombok, West Nusa Tenggara, on October 11-15, 2022. SEMAR UGM won the 1st place in Battery-Electric Class, Prototype Category for SEMAR PROTO and the 2nd place in Internal Combustion Engine Class, Urban Concept Category for SEMAR URBAN.
In this prestigious energy-friendly car race that challenges students from all over the world to explore and finally providing solutions for advanced-vehicle energy needed in this era, SEMAR UGM surpassed 49 participants consist of 33 Indonesia’s representatives dan 16 participants from other countries like India, Kazakhstan, Republic of Korea, Malaysia, Nepal, Philippines, Singapore, and Vietnam.
Competing in the Prototype Category with the concept of an energy-efficient futuristic car, SEMAR PROTO left the judges in awe by reaching the distance of 587 km/kWh. The arena of Urban Concept Category focussing on the design of a four-wheeled energy-efficient vehicle needed by urban communities was successfully conquered by SEMAR URBAN by carrying the superiority of their vehicle in its efficient usage of the fuel and its carbon fibre body, making it weighed only 89 kilograms and reached the distance of 332 km/l.
The whole process of the idea brainstorming, the production of the car, and finally competing at the racetrack of Mandalika International Street Circuit was crucial for SEMAR UGM in winning the competition. SEMAR’s representative stated on Sunday (16/10) that Mandalika International Street Circuit was a real challenge, making all the preparations should be executed well, especially in preparing the driver’s condition to face the uncertain weather, the length of the racetrack, the high temperature of the venue, and many other factors.
Congratulations, SEMAR UGM, for this proud achievement. May this victory would bring about more remarkable achievements and innovations for the advancement of science and technology.
(Source: Subdirektorat Kreativitas Mahasiswa Direktorat Kemahasiswaan Universitas Gadjah Mada)
PR of DTMI | October 2022
Prof. Ir. Budi Hartono, S.T., MPM., Ph.D., IPM., ASEAN Eng., Head of the Department of Mechanical and Industrial Engineering, Faculty of Engineering UGM, was titled a Professor in Industrial Engineering on Tuesday (4/10) at the Senate Hall, UGM Central Building. Prof. Budi Hartono presented an inaugural speech titled “Perspektif Sistem dalam Pengelolaan Proyek” at the Professor’s inauguration ceremony. This inauguration ceremony invites Professors of Engineering, DTMI lecturers, and families and colleagues of Prof. Budi Hartono.
Congratulations for both Prof. Budi Hartono and the Department of Mechanical and Industrial Engineering on this remarkable academic achievement. May all the knowledge, achievements, and experiences that have been acquired would always bring benefit for both the education and scientific world, especially the Industrial Engineering education.
You can watch the inauguration speech and the whole inauguration ceremony procession at https://www.youtube.com/watch?v=ZM4jv2nB2Y8
PR of DTMI | October 2022
The opening ceremony of Mechanical Engineering UGM’s 63rd Dies Natalis had been held on Tuesday (06/09) at the yard of KMTM (Keluarga Mahasiswa Teknik Mesin) DTMI FT UGM. The ceremony started off the timeline for the whole events to be held in celebrating the Dies Natalis up until November 2022.
Opening speeches filled with wishes and prayers for Mechanical Engineering UGM in its happy day were delivered by Head of KMTM Andihan Lukas, Head of Mechanical Engineering Program Ir. Muslim Mahardika, S.T., M.Eng., Ph.D., IPM., ASEAN Eng., and Head of Department of Mechanical and Industrial Engineering Prof. Ir. Budi Hartono, S.T., M.Pm., Ph.D., IPM., ASEAN Eng.. The ceremony was then continued to cutting the tumpeng done by Head of Mechanical Engineering Program and the tumpeng was then presented to Prof. Ir. Samsul Kamal, M.Sc., Ph.D representing the lecturers and a 2022 freshman from Papua representing the students. As the closing event of the ceremony, a feast was held for all guests.
This opening ceremony was attended by committee members of the Department and Program, lecturers, committee members of KMTM, employees of the Department, and Mechanical Engineering Program’s students.
PR of DTMI | September 2022
Department of Mechanical and Industrial Engineering Faculty of Engineering Universitas Gadjah Mada has officially inaugurated 95 Bachelor Program students as graduates of batch August 2022 in the event of “Pelepasan Wisudawan Departemen Teknik Mesin dan Industri Universitas Gadjah Mada” on Thursday (25/08), taking place at the parking area of DTMI.
Attended by graduates and their parents, in total of 25 Mechanical Engineering Bachelor Program graduates and 70 Industrial Engineering Bachelor Program graduates were presented with plaques in this event as the regalia of their graduation. Diazka Meidy as one of the Mechanical Engineering graduates scored the highest GPA in his program with 3.87 GPA, and both Arista Adriani and Hans Bastian Wangsa scored 3.92 GPA, making it the highest GPA scored by Industrial Engineering graduates and by DTMI’s graduates of batch August 2022.
Congratulations for all graduates! Good luck on your bright career ahead!
PR of DTMI | August 2022
Reactics Chem-E-Car UGM won the 1st place in Malaysia Chem-E-Car Competition 2022 that was held in Malaysia on Tuesday (09/08).
IEM Chem-E-Car Presentation Competition is an annual competition conducted by the Institution of Engineers Malaysia (IEM), with this year’s host being UCSI University. The participants came from various countries, with Universitas Gadjah Mada (UGM) being one of the teams representing Indonesia. UGM’s team consists of Yehezkiel Marco Natanael – Chemical Engineering 2020, Mikael Bagastama Jatinitiraga – Chemical Engineering 2020, Muhammad Akbar Ariffandi – Chemical Engineering 2020, and Muhammad Husein Hartanto – Mechanical Engineering 2020.
This victory, instead of marking the end of Reactics Chem-E-Car UGM’s journey, is hoped to provide a boost for the spirit of never-ending improvement in order to achieve better accomplishments in future competitions which Reactics Chem-E-Car UGM would be participating in both nationally and internationally.
PR of DTMI | August 2022
In total of 317 Gadjah Mada Muda (GAMADA); consists of 144 Mechanical Engineering Bachelor Program students, 102 Industrial Engineering Bachelor Program students, 35 Mechanical Engineering Master Program students, 14 Industrial Engineering Master Program students, 8 Mechanical Engineering Doctoral Program students, and 14 Industrial Engineering Doctoral program students; have officially become parts of DTMI FT UGM for the academic year of 2022/2023.
Info Day as a welcoming event has been held on Wednesday (10/08) for Bachelor Program students and Thursday (11/08) for both Master and Doctoral Program students. Attended by both students and their parents, the event became the first information source about DTMI’s laboratories, lecturers, employees, and other academic-related information given out by the Department’s committee members.
Welcome to the family, fellow GAMADA! Good luck on your steps ahead with DTMI!
PR of DTMI | August 2022
Gadjah Mada Aerospace Team (GMAT) successfully achieved the 6th world rank and the 3rd Asian rank in United States Annual Student CanSat Competition 2022 held on June 9-12, 2022.
The annual competition held by the American Astronautical Society (AAS) brings up different missions every year. As for 2022’s CanSat, the mission was Tethered Payload, which all team participants were required to build a container design connected with the payload using a 10-meter thread with a camera in it to do the recording using the south orientation pointing 45 degrees from the breaking point.
Before reaching the final stage, GMAT, represented by Narantaka as its international division, needed to go through a tight qualification stage along with hundreds of other teams during the Registration and Preliminary Design Review (PDR) processes. The effort was finally paid off when Narantaka achieved the 3rd rank out of 49 and advancing to the final stage started with the Critical Design Review (CDR) process.
Prior to the pandemic, CanSat Competition was held at Virginia Tech, Blacksburg, Virginia, USA. However, due to the pandemic situation that was still going until the D-Day of the competition, CanSat Competition 2022 was held online. Narantaka team consists of Mukhsin Al Fikri L., Della Anindhita Cahyarani (TI 2019), Fiorella Averina G., Mahesafin Alna Ramadhan (TM 2019), Ari Permana (TM 2019), Ananda Hafidh Rifai K., Lutfi Andriyanto, Alphonsus Jovian Joy Reynaldo, and Dzaki Fathdanish with Dr. I Made Miasa, S.T., M.Sc. as the team supervisor who was constantly providing Narantaka with some inputs and advice during the competition.
Mukhsin Al Fikri Lubis, the leader of Narantaka, commented on how his team members kept supporting each other throughout the competition processes and stated that it was an impressive endeavor being in such a team in order to bring joy and pride for both the alma mater and Indonesia. With all the achievements that have been acquired, Mukhsin hoped that Narantaka GMAT would be motivated to achieve even greater accomplishments in the future CanSat Competitions and in any other competition ahead.
This prominent achievement by Narantaka GMAT cannot be separated from the never-ending support and prayer by the family, relatives, friends, and sponsors. A massive gratitude is given to the sponsors (Pertamina, Waskita, Bukit Asam, and PJB) for the financial support, and hopefully this partnership would last longer and would eventually bring massive benefits for both parties.
GMAT would evaluate on the process and result from this year’s competition in hope to find rooms for further improvement, all for elevating the beloved DTMI alma mater.
(Source: GMAT)
PR of DTMI | August 2022
Bimasakti UGM held a Grand Launching for “Tim Bimasakti” racing car that will be competing at Formula Student Netherlands (FSN) on Monday (20/6). The competition would take place on July 9-14, 2022, at TT Assen Circuit, Netherlands. FSN is a competition which teams of students would test their skills on understanding, designing, composing, developing, and competing with formula-styled racing cars.
“Today marks the launch of the latest generation car designed by Bimasakti and the team’s send-off to the formula competition in the Netherlands. We appreciate the support from our partners and thank everyone who has guided this team” Dr. Suharyadi, Director of Student Affairs UGM, said at the front yard of Balairung, UGM Yogyakarta, on Monday (20/6) as quoted from ugm.ac.id.
Although the team was not aiming for the first place, Tim Bimasakti, after two years of preparation, would still do their best to present the best result for Indonesia. “We do not represent Bimasakti alone, but Indonesia,” stated by Aditya Maheranta , the Head of Bimasakti
Best of luck, Tim Bimasakti UGM! Do and achieve your best for Indonesia!
PR of DTMI | June 2022
