Prof. Ir. Alva Edy Tontowi, M.Sc., Ph.D., IPU., ASEAN Eng.

Professor, Industrial Engineering Study Program

Email: alvaedytontowi@ugm.ac.id

Research interest: Product design, biomaterials, additive manufacturing

Education

• Ir., Mechanical Engineering Gadjah Mada University,Indonesia, 1986
• MSc., Engineering Design & Economic University of Wales-Swansea-UK, 1995
• Ph.D., Rapid Prototyping and University of Leeds-UK, 2000

Honors and Awards

• ASEAN Eng., AFEO (ASEAN Federation of Engineers Organization), 2018
• Dosen Sain-Teknologi Terbaik I UGM, Universitas Gadjah Mada, 2018
• Dosen Sain-Teknologi Terbaik II Nasional, Kementerian Riset, Teknologi dan DIKTI Republik Indonesia, 2019
• IPU (Insinyur Profesional Utama), Persatuan Insinyur Indonesia, 2020
• IPM (Insinyur Profesional Madya), Persatuan Insinyur Indonesia, 2018
• Satyalancana Karya Satya XX, Negara Republik Indonesia, 2011
• Satyalancana Karya Satya XXX, Negara Republik Indonesia, 2018

Membership in Professional Organization

• Persatuan Insinyur Indonesia (PII) DIY, 2016– present
• Member of Masyarakat Standariisasi Indonesia/MASTAN, 2016 – present
• Member of A2K3-DIY, 2011-present
• Member of Society for Biomaterials, 2014 – present

Publications and presentations (Most important from past 5 years) :

• Studi Rantai Pasok Lokal pada Lingkungan Industri Kecil Kabupaten Tegal. [2020].
  (Ketua Peneliti) Prof. Ir. Alva Edy Tontowi, M.Sc., Ph.D., IPM., ASEAN Eng. (Anggota Peneliti) Tri Widodo, Prof., M.Ec.Dev., Ph.D. (Anggota Peneliti) Joash Elisha Stephen Tapiheru (Anggota Peneliti) Agustina Merdekawati, S.H., LL.M. (Anggota Peneliti) Dr. I Made Miasa, S.T., M.Sc. (Anggota Peneliti) Adhika Widyaparaga, S.T., M.Biomed.E., Dr.Eng. (Anggota Peneliti) Ir. Budhi Sholeh Wibowo, S.T., M.T., MBA, PDEng., IPM, ASEAN Eng.
• #Pengembangan Perangkat Pencegahan dan Pengobatan Penyakit Kardiovaskuler (Pengembangan Perangkat Terapi Penyakit Intravaskular dengan Stent). [2018].
  (Ketua Peneliti) Prof. Dr. drg. Widowati Siswomihardjo, M.S. (Anggota Peneliti) drh. Setyo Budhi, MP. (Anggota Peneliti) Muhammad Kusumawan Herliansyah, S.T., M.T.,Ph.D. (Anggota Peneliti) Dr. drg. Siti Sunarintyas, M.Kes. (Anggota Peneliti) Prof. Ir. Alva Edy Tontowi, M.Sc., Ph.D., IPM., ASEAN Eng. (Anggota Peneliti) Prof. dr. Marsetyawan Heparis Nur Ekandaru M.Sc., Ph.D.
• Pengembangan Perangkat Pencegahan dan Pengobatan Penyakit Kardiovaskuler (Pengembangan Perangkat Terapi Penyakit Intravaskular dengan Stent). [2017].
  (Ketua Peneliti) Prof. Dr. drg. Widowati Siswomihardjo, M.S. (Anggota Peneliti) drh. Setyo Budhi, MP. (Anggota Peneliti) Muhammad Kusumawan Herliansyah, S.T., M.T.,Ph.D. (Anggota Peneliti) Dr. drg. Siti Sunarintyas, M.Kes. (Anggota Peneliti) Prof. Ir. Alva Edy Tontowi, M.Sc., Ph.D., IPM., ASEAN Eng. (Anggota Peneliti) Prof. dr. Marsetyawan Heparis Nur Ekandaru M.Sc., Ph.D.

• Buku Putih Sistem Inovasi Era Revolusi Industri 4.0 Menuju UMKM Berdaya Saing Global Membangun Indonesia dari Daerah. [2019].
  (1) Dian Fatmawati, S.I.P., M.A. (2) Ardyanto Fitrady, M.Si., Ph.D. (3) Tri Widodo, Prof., M.Ec.Dev., Ph.D. (4) Agustina Merdekawati, S.H., LL.M. (5) Prof. Dr.Ir. Deendarlianto, S.T., M.Eng. (6) Prof. Ir. Alva Edy Tontowi, M.Sc., Ph.D., IPM., ASEAN Eng. (7) Adhika Widyaparaga, S.T., M.Biomed.E., Dr.Eng. (8) Ir. Budi Hartono, S.T., MPM, Ph.D., IPM, ASEAN ENG. (9) Ir. Budhi Sholeh Wibowo, S.T., M.T., MBA, PDEng., IPM, ASEAN Eng. (10) Akmal Irfan Majid, S.T., M.Eng. (11) Dawi Karomati Baroroh, S.T., M.Sc.
• Dari Hulu Ke Hilir: Perjalanan Sebuah Alat Kesehatan. [2021].
  (1) drg. Margareta Rinastiti, M.Kes., Sp.KG., Ph.D (2) drg. Trianna Wahyu Utami, MD.Sc., Ph.D. (3) BONIFASIUS PRIMARIO WICAKSONO (4) Dr.Eng. Agustinus Winarno, S.T., M.Eng. (5) Muhammad Kusumawan Herliansyah, S.T., M.T.,Ph.D. (6) Prof. Dr. drg. Widowati Siswomihardjo, M.S. (7) Prof. Ir. Alva Edy Tontowi, M.Sc., Ph.D., IPM., ASEAN Eng. (8) PUPUT IIN QUR’AINI (9) drg. Dyah Anindya Widyasrini, M.DSc. (10) Heribertus Dedy Kusuma Yulianto (Scopus: Kusuma Yulianto, H.D.) (11) drh. Dinar Arifianto, M.Sc. (12) Dr. Retno Ardhani (13) drg. Rosa Amalia, M.Kes, PhD (14) drg. Nunuk Purwanti, M.Kes., Ph.D.
• Desain Produk Inovatif & Inkubasi Bisnis Kompetitif. [2016].
  (1) Prof. Ir. Alva Edy Tontowi, M.Sc., Ph.D., IPM., ASEAN Eng.
• Laser Sintering: Teori, Simulasi Numerik dan Eksperimen. [2008].
  (1) Prof. Ir. Alva Edy Tontowi, M.Sc., Ph.D., IPM., ASEAN Eng.
• Alat Pembangkit Gelembung Udara berukuran Mikrometer dengan Saluran Orifice dan Pipa Berpori. [2020].
  (1) Prof. Dr.Ir. Deendarlianto, S.T., M.Eng. (2) Prof. Ir. Alva Edy Tontowi, M.Sc., Ph.D., IPM., ASEAN Eng. (3) Wiratni, S.T., M.T., Ph.D.
• Buku Panduan : Alat Ukur Kesiapan Teknologi Klaster Industri. [2019].
  (1) Novi Marlyana (2) Prof. Ir. Alva Edy Tontowi, M.Sc., Ph.D., IPM., ASEAN Eng. (3) Ir. Hari Agung Yuniarto, ST., M.Sc., Ph.D., IPU, ASEAN Eng.
• Improved Mechanical Properties and In-Vitro Degradation of Chitosan-Pristine Graphene Nanocomposites. [2021].
  (1) FARID WAJDI (2) Dr. Indraswari Kusumaningtyas, ST., M.Sc. (3) Andi Rahadiyan Wijaya, S.T., M.Sc.Ph.D (4) Prof. Ir. Alva Edy Tontowi, M.Sc., Ph.D., IPM., ASEAN Eng.
• “Systematic Review: Effectiveness of Combination of Lactic Acid Attractants for Control of Dengue Vector Aedes spp”. [2020].
  (1) dr. Tri Baskoro Tunggul Satoto, M.Sc.,Ph.D (2) Prof. Ir. Alva Edy Tontowi, M.Sc., Ph.D., IPM., ASEAN Eng. (3) Sri Hartini, S.Kep., NS., M.Kes., Ph.D
• A dynamic model of budget competition allocation on craft industry: Evidence from Indonesia. [2019].
  (1) Nasution, Arman Hakim (2) Prof. Ir. Alva Edy Tontowi, M.Sc., Ph.D., IPM., ASEAN Eng. (3) Bertha Maya Shopa, ST., M.Sc., Ph.D. (4) Ir. Budi Hartono, S.T., MPM, Ph.D., IPM, ASEAN ENG. (5) Persada, Satria Fadil
• A preliminary dynamic model of success to successfull archetype in government budget competition allocation by using balanced score card-like framework. [2018].
  (1) A. H Nasution (2) Prof. Ir. Alva Edy Tontowi, M.Sc., Ph.D., IPM., ASEAN Eng. (3) Bertha Maya Shopa, ST., M.Sc., Ph.D. (4) Ir. Budi Hartono, S.T., MPM, Ph.D., IPM, ASEAN ENG.

Service Activities

• UBD ( University of Bina Dharma ), Guest lecturer, Product Design, Palembang-Indonesia, 2016
• LPPM UGM, Workshop, Innovation & Technology for Designing of Craft Product Industry, Yogyakarta-Indonesia., 2016
• LPPM UGM, Workshop, Problem Identification & Ideas Generation for Research Proposal, , Yogyakarta-Indonesia., 2016
• LIPI, Seminar of Metallurgy Materials in Conjuntion with the 3rd Biomaterials Conference, Bonegraft with Future, Jakarta-Indonesia. 2015
• Department of Mechanical Engineering Muhammadiyah University of Surakarta, Workshop, Roadmap of Research in Biomedical Engineer , Yogyakarta-Indonesia, 2015
• LPPM UGM, Workshop, Idea Shopping in Research, Yogyakarta- Indonesia, 2015
• Department of Industrial Engineering, University of Technology Yogyakarta, Workshop, Industrial Engineering in Medical World, Yogyakarta-Indonesia, 2015
• Department of Mechanical and Industrial Engineering UGM, Workshop, Design and Additive Manufacturing of Biomaterials and Human Organ,Yogyakarta-Indonesia., 2015
• The NanoCON014, International Conference, Future Biomaterials for Manufacturing Synthetic Bone Tissue, Pune-India, 2014
• PT Datascrip, 3D Documentation: A Robust Way for Delivering Better View, Jakarta-Indonesia, 2014
• HMF-FMIPA Gadjah Mada University, Workshop, Nano-Technology for Supporting Our Everyday Life, Yogyakarta-Indonesia, 2014
• LPPM Gadjah Mada University, Workshop, Idea Shopping in Research, April 2014, Yogyakarta-Indonesia.
• Balai Besar Karet, Kulit dan Plastik (BBKKP) Department of Industry Republic of Indonesia, Bioplastic as A Composite Matrix, Yogyakarta-Indonesia, 2014
• Disperindagkop-Sleman District, Workshop, Standardization of Apropriate Technology Products,Yogyakarta- Indonesia, 2013
• BAPPEDA DIY, The Role of DRD-DIY on Implementation of Innovation for Building Prosperity in Yogyakarta Special District, Yogyakarta-Indonesia, 2013
• LPPM Gadjah Mada University, Workshop, Green Production Processes,Yogyakarta-Indonesia, 2013
• Tontowi, A.E., 2013, Desain Produk Inovatif, Deepublish, Yogyakarta.
• Tontowi, A.E. and Armis, 2012, Gama-Hip Prosthesis, Ditjen HKI (P001xx).
• Tontowi, A.E., Triyono, J., Rochmadi dan Dewo, P., 2014, Komposisi Bahan Biofotokomposit untuk Aplikasi Organ Keras dan Metode Pembuatannya, Ditjen HKI (P001xx).
• Tontowi, A.E., Siswomihardjo, W., Sunarityas, Herliansyah, M.K., 2015, Desain INA-Stent, Ditjen HKI (P00xx).