Arsip:

Event

Journal of Materials Processing and Characterization (JMPC)

Journal of Materials Processing and Characterization (JMPC) is an international, open-access and peer-reviewed journal aimed to facilitate researchers in disseminating their research works in the field of processing and characterization of engineering materials as well as biomaterials for biomedical applications. The journal is published jointly by Department of Mechanical and Industrial Engineering, Faculty of Engineering, Universitas Gadjah Mada (UGM) and Centre for Innovation of Medical Equipment and Devices (CIMEDs) UGM.

In general, JMPC covers all the research topics related to the processing (such as material preparations, fabrication techniques, post-processing treatments) and characterizations (such as novel methods for characterization, experimental testing and numerical analyses) of metals, polymers, ceramics and composites. To be more specific, the journal covers the following research topics:

  1. Processing technologies of engineering materials and biomaterials, including casting, solidification, forming, forging, hot and cold-working, machining, powder metallurgy, extrusion, heat treatments, additive manufacturing, welding, and injection moulding.
  2. Surface treatments of engineering materials and biomaterials, including coatings, shot and grit blasting, anodization, physical and chemical treatments.
  3. Characterizations of engineering materials and biomaterials, including microstructural analysis, surface characterizations, mechanical testing, electrochemical characterization and tribological testing.
  4. Failures of engineering materials and biomaterials, including fractures, fatigue, corrosion and wear.

We cordially invite authors to submit their manuscript in English and in the form of either research articles or review papers.

 

VISIT US ON: https://jurnal.ugm.ac.id/jmpc

MEET National Conference 2019

Department of Mechanical and Industrial Engineering of Universitas Gadjah Mada proudly presents Mechanical Engineering and Emerging Technologies National Conference (MEET-nConf) 2019. The MEET-nConf 2019 objectives are bringing together researchers, scientists, academics, students, policy makers, practitioners, private companies and professionals to exchange information and identify research needs in the areas of Mechanical and Industrial Engineering. In this annual conference, we seek to expand the scope to a wider community of researchers allowing a higher quality of knowledge transfer and communication. We hope that by collaborating with the researcher from different department and university will increase in both the quality and visibility of publications. The conference would also contribute to continuous development of the research and technology in Mechanical and Industrial engineering for current and future era.

     • Public Lecture (Kuliah Umum)  : 18 September 2019
     • Conference                                         : 19 September 2019

Journal of Mechanical Design and Testing

Journal of Mechanical Design and Testing

Journal of Mechanical Design and Testing (JMDT) is an open-access and peer-reviewed journal aimed to disseminate the results of research in the field of mechanical engineering. The journal is biannually published an original research articles and / or review articles that concern to the following issues:

  • Design of mechanical components used in engineering structures, machines and engines, computer aided design (CAD), computer aided manufacturing (CAM), the development of methodology for designing machine elements or mechanical components.
  • Finite element analysis, computational fluid dynamics, computational heat and mass transfer, applied mechanics, biomechanics.
  • Manufacturing technologies, materials processing technologies, conventional and non-conventional machining, powder metallurgy, casting, welding, additive manufacturing and rapid prototyping, automation.
  • Evaluation of engine performance, tribology and lubrication, engine maintenance, testing of mechanical components, materials characterizations, failure analysis.
  • Experimental fluid dynamics, multiphase flow, heat and mass transfer, pump and compressor.
  • Energy conversion, turbo machineries, internal combustion engines, power plant.
  • Mechanical engineering education, learning method for mechanical engineering education, engineering ethics.

We cordially invite authors to submit their manuscript in English or Bahasa Indonesia. JMDT is published by Department of Mechanical and Industrial Engineering, Faculty of Engineering, Universitas Gadjah Mada.

Announcements

Call for papers for Vol. 2

We invite authors in the related fields of Mechanical Design and Testing to submit papers for the upcoming edition of the Indonesian Journal of Biotechnology (Volume 2, Issue 01 and 02).

visit us on:

https://jurnal.ugm.ac.id/jmdt

Industrial Visit 2019

 

Industial Visit 2019 (Kunjungan Industri 2019) telah sukses dilakukan pada 3-4 Juli 2019 dengan tiga lokasi industri, yaitu:

[restabs alignment=”osc-tabs-left” pills=”nav-pills” responsive=”false” seltabcolor=”#d3d3d3″]
[restab title=”PT Asahimas Flat Glass” active=”inactive”]

PT Asahimas Flat Glass

AddressKawasan Industri Indotaisei, Sektor 1A Blok J-L, Cikampek, 41373, Kalihurip, Cikampek, Karawang Regency, West Java 41373

[/restab]

[restab title=”PT. PK Manufacturing Indonesia”]

PT. PK Manufacturing Indonesia

AddressKawasan Industri KIIC, Jln Harapan Raya Lot JJ-2B, Sirnabaya, Teluk Jambe Timur, Sirnabaya, Karawang Barat, Kabupaten Karawang, Jawa Barat 41361

[/restab]

[restab title=”PT. Dirgantara Indonesia”]

PT. Dirgantara Indonesia

Addressnomor, Jl. Pajajaran No.154, Husen Sastranegara, Cicendo, Bandung City, West Java 40174

[/restab][/restabs]

BUKA BERSAMA dan BAKTI SOSIAL HMP-TM ft. KMP-TI 2018

HIMPUNAN MAHASISWA PASCASARJANA TEKNIK MESIN (HMP-TM) bekerjasama dengan KELUARGA MAHASISWA PASCASARJANA TEKNIK INDUSTRI (KMP-TI) melakukan kegiatan Buka Bersama dan Bakti sosial bersama anak-anak TK/RA, SD/MI

pada tanggal: 26 Mei 2018

bertempat di: Pondok pesantren Zuhriyah 2 (jl. Magelang KM 11 Derono, Tridadi Sleman DIY)

Industrial Visit 2018

Industrial Visit 2018

Industial Visit 2018 (Kunjungan Industri 2018) telah sukses dilakukan pada 9-10 Agustus 2018 dengan tiga lokasi industri, yaitu:

[restabs alignment="osc-tabs-left" pills="nav-pills" responsive="false" seltabcolor="#d3d3d3"]
[restab title="PT. BARATA Indonesia" active="inactive"]

PT. BARATA Indonesia

AddressJl. Veteran No.241, Tenggulunan, Gending, Kec. Kebomas, Kabupaten Gresik, Jawa Timur 61123

[/restab]

[restab title="PT. PJB GRESIK"]

PT. Pembangkit Jawa Bali (PJB) - UP. Gresik

AddressJl. Harun Thohir No.1, Singosari, Sidorukun, Kec. Gresik, Kabupaten Gresik, Jawa Timur 61112

[/restab]

[restab title="PT. PINDAD (PERSERO)"]

PT. PINDAD (PERSERO) TUREN - MALANG

AddressJl. Panglima Sudirman No.1, Turen, Kec. Turen, Malang, Jawa Timur 65175

[/restab][/restabs]

MEET National Conference 2018

MEET National Conference 2019

MEET National Conference 2018 had been held on November 21 2018 which was the first Conference that held by Himpunan Mahasiswa Pascasarjana Teknik Mesin UGM. 

The MEET National Conference objectives are bringing together researchers, scientists, academics, students, policy makers, practitioners, private companies and professionals to exchange information and identify research needs in the areas of Mechanical and Industrial Engineering. In this annual conference, we seek to expand the scope to a wider community of researchers allowing a higher quality of knowledge transfer and communication. We hope that by collaborating with the researcher from different department and university will increase in both the quality and visibility of publications. The conference would also contribute to continuous development of the research and technology in Mechanical and Industrial engineering for current and future era.

email us on: meet-nconf.ft@ugm.ac.id

visit us on  : meet-nconf.ft.ugm.ac.id