Prof. M.Noer Ilman, S.T.,M.Sc.,Ph.D

   Engineering Material Laboratory

   email: ilman_noer@ugm.ac.id

Professor | Mechanical Engineering

Education

S.T., Mechanical Engineering, Universitas Gadjah Mada-Indonesia, 1994
M.Sc., Physical Metallurgy, Leeds University-UK, 1997
Ph.D., Physical Metallurgy, Leeds University-UK, 2001


Academic Experience
Universitas Gadjah Mada, Lecturer, Department of Mechanical & Industrial Engineering, 1995-Present, Full Time
Universitas Gadjah Mada, Head of Department, Department of Mechanical & Industrial Engineering, 2016 - Present, Full Time
Universitas Gadjah Mada, Chief of Financial and Human Resources Affairs, Department of Mechanical & Industrial Engineering, 2007-2015, Full Time


Current membership in professional organizations

Society of Automotive Engineers of Indonesia (IATO), 2011 – Present
The Institution of Engineers Indonesia (PII), 2017 – Present
American Welding Society (AWS), 2017 – Present
American Society of Mechanical Engineering (ASME), 2017 – Present
Service activities (within and outside of the institution)
Engineering Consultants, Projects under Faculty of Engineering, Universitas Gadjah Mada, 1998 - Present

Contributes actively in various community development schemes, such as:

1. Optimalisasi Sektor Pertanian sebagai Upaya Pengentasan Kemiskinan Desa di DusunBlumbang dan Puser, Desa Banjararum, Kecamatan Kalibawang, Kabupaten KulonProgo Propinsi DIY. 2015

2. Penyempurnaan Base-Camp Untuk pengelolaan Mikro-Hidro di Dusun Kedungrong.Kecamatan Sami Galuh, Kabupaten Kulonprogo. Provinsi Daerah IstimewaYogyakarta. 2014

 

Publications and presentations (Most important from past 5 years)

“The effect of heating temperature in static thermal tensioning (STT) welding on mechanical properties and fatigue crack propagation rate of FCAW in steel A 36”, N Subeki, Jamasri, MN Ilman, PT Iswanto, AIP Conference Proceedings, 1788 (1), 030057, (2017).

“Optimalisasi Heat Input Pengelasan Gmaw Baja A36 Melalui Pemeriksaan Hasil Las”, H Wibowo, MN Ilman, PT Iswanto, Mekanika ,15 (2), (2016). (in Indonesian language).

“Perilaku Korosi Sambungan Las Fsw Tak Sejenis Antara Aa5083 Dan Aa6061-T6 Dengan Variasi Putaran Tool Dalam Larutan 3, 5% NaCl”, FXA Wahyudianto, MN Ilman, PT Iswanto, Mekanika 15 (2), (2016). (in Indonesian language).

“Analisa Heat Input Pengelasan terhadap Distorsi, Struktur Mikro dan Kekuatan Mekanis Baja A36”, H Wibowo, MN Ilman, PT Iswanto, Rekayasa Mesin, 7 (1), pp. 5-12, (2016). (in Indonesian language)

“Effects of nitrogen ion implantation time on tungsten films deposited by DC magnetron sputtering on AISI 410 martensitic stainless steel”, V Malau, MN Ilman, PT Iswanto, G Jatisukamto, AIP Conference Proceedings 1717 (1), 040031, (2016).

“Mitigating distortion and residual stress by static thermal tensioning to improve fatigue crack growth performance of MIG AA5083 welds”, Ilman, M. N., Kusmono, Muslih, M. R., Subeki, N., & Wibowo, H., Materials and Design, 99, pp. 273-283, (2016).

“Failureanalysis and fatigue performance evaluation of a failed connecting rod of reciprocating air compressor”, Ilman, M. N., & Barizy, R. A., Engineering Failure Analysis, 56, pp. 142-149, (2015).

“Thedevelopment of acicular ferrite in reheated Ti–B–Al–N-type steel weld metals containing various levels of aluminium and nitrogen”, Ilman, M. N., Cochrane, R. C., Evans, G. M, Welding in the World, 59(4), pp. 565-575, (2015).

“Analysisof a failed primary superheater tube and life assessment in a coal-fired powerplant”, Ilman, M. N., Prihajatno, M., & Kusmono, Journal of Failure Analysis and Prevention, 15(2), pp. 200-204, (2015).

“Effect of titanium and nitrogen on the transformation characteristics of acicular ferrite in reheated C-mn steel weld metals”, Ilman, M. N., Cochrane, R. C., & Evans, G. M., Welding in the World, 58(1), pp. 1-10, (2014).

“Chromate inhibition of environmentally assisted fatigue crack propagation of aluminium alloy AA 2024-T3 in 3.5% NaCl solution”, Ilman, M. N., International Journal of Fatigue, 62, pp. 228-235, (2014).

“Analysis of material degradation and life assessment of 25Cr-38Ni-mo-ti wrought alloy steel (HPM) for cracking tubes in an ethylene plant”, Ilman, M. N., & Kusmono, Engineering Failure Analysis, 42, pp. 100-108, (2014).

“Analysis of internal corrosion in subsea oil pipeline”, Ilman, M. N., & Kusmono, Case Studies in Engineering Failure Analysis,2(1), pp. 1-8, (2014).

Recent professional development activities

Main research area: Mechanics of Materials, Welding, Corrosion, Failure Analysis[/restab]